Foison Vinyl Cutter Usb Driver
2/12/2019by admin
Foison C-48 Vinyl Cutter Setup instructions SignTools Settings After installing CorelDRAW the next step is to install SignTools. Follow the instructions on 4 and 5 of the SignTools 4 User Guide. Once you have installed SignTools, open Corel Draw and click on the Application Launcher (see picture below) and choose SignTools 4. Next click on the 'Cut' button and then the 'Setup' button. Select your vinyl cutter/plotter model from the 'Device' drop down box and select your port.
- Foison Vinyl Cutter Software

Foison Vinyl Cutter Software
If you are using a Serial (Com) port click on the Settings button and set the following settings:- Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow Control: Hardware Please check your plotter's manual and/or the Com settings on the plotter's control panel and ensure that they match the settings in SignTools. Serial Plotter Cable Please ensure that your Serial (Com) cable is a RS 232-C cable. SignTools will not communicate with your plotter with a different cable. If you are unsure if your cable is a RS 232-C cable, contact your plotter distributor. USB Connection If you are connecting your cutter via a USB connection you must install the USB driver that came with your cutter first. This will create a an extra Com or USB port that you can select in the SignTools 'Device Setup' dialog box. CorelDraw Settings In CorelDraw's Layout menu select Page Setup.